The red and purple lights on the BlendJet blender typically signal issues like low charging, battery problems, overheating, misalignment, or damaged electrical components.
BlendJet is a portable, on-the-go blender that allows people to have their nutrition wherever they are, helping them take care of their health.
It features a straightforward and user-friendly design for the convenience and ease of users.
What Causes The Red And Purple Blinking Lights On Your BlendJet?
Have you ever seen red and purple lights blinking on your BlendJet blender and felt confused or frustrated? If you’re unsure about why this is happening, you’re in the right place.
Here, I’ve outlined some reasons why you might be seeing these blinking red and purple lights:
Charging Issues Or Insufficient Charge
If your BlendJet blender is not charged and the battery is overly drained, you may notice red and purple blinking lights.
Sometimes, it happens because you might lose track of when you last charged the blender and how many blends you’ve made. If you continue using it without recharging, the blinking lights usually indicate a low battery.
On the other hand, if you put your blender on charge and it still blinks red and purple lights, it could be because you forgot to turn on the switch.
It might also be due to a low-power output switch or issues with the charger or charging port, preventing the blender from charging properly.
At times, the red and purple lights may indicate underlying battery issues that you might not be aware of.
If your battery is damaged or faulty, it can affect the charging process, leading to the appearance of these blinking red and purple lights.
Another reason you may notice those red and purple blinking lights on your blender is overheating. While these lights can be annoying, they’re actually alerting us to issues we might not have known about, so it’s kind of a blessing, right?
Essentially, if you’ve been using your blender continuously without breaks, you may not only see the blinking lights but also feel that your blender is getting hot.
This indicates that your blender is overheated due to prolonged use.
Damaged Electric Components
If the fuse in the base is burnt or if water comes into contact with the bottom, it can damage or burn the electrical components of the blender.
When this occurs, the red and purple blinking lights are triggered, indicating an issue with the electrical components that need attention.
The Blender Is Not Aligned
Another possibility is that the blender is not aligned properly, meaning the base or the lid is not tightly closed.
If the seals of the blender are loose or partially opened, the blender will flash red and purple lights to alert you about the issue.
How Can You Resolve The Red And Purple Lights Issue On Your BlendJet?
When you notice the red and purple blinking lights on your blender, it’s a signal that something might be wrong. To address and stop these blinking lights, I’ve shared some practical and tested solutions below:
Reset The Blender
Sometimes, resetting the blender can fix temporary issues, like the presence of red and purple blinking lights.
To reset the blender, follow these steps:
- Press the power button for 15-20 seconds until you see the indicator lights blink.
- Release the power button.
- Wait for a moment.
- Then, press the power button again to turn on the blender. Hopefully, the lights will be gone.
Ensure That The Blender Has Sufficient Charge
Firstly, whenever you notice the lights, the initial step is to ensure your blender is charged.
Place it on charge, confirm the switch is on, and the blender plug is securely connected with adequate power output for a proper charge.
If your blender still isn’t charging, check the plug and charging port. If there are issues, getting them fixed will help charge your blender and make those lights disappear.
Check The Battery
If your blender is charged and you’re still seeing blinking lights, consider checking the battery. To confirm if it’s a battery issue, put your blender on charge and then use it.
If the blender works well and the blinking lights disappear, it indicates a problem with the battery. Have your battery checked, and depending on the extent of the issue, get it fixed or replaced.
Align The Blender
For your blender to work perfectly and for those blinking lights to go away, ensure that your lid and base are tightly secured, and the blender is properly aligned.
Rotate your jar clockwise, and the light on the base should align with the arrow on the jar. Also, check that the magnets used for the blades to spin, present on both the jar and base, are properly aligned.
Once everything is aligned and the seals are closed, the lights will disappear.
Let It Cool
Consider the blender as yourself. You also get tired and stop functioning properly if you work continuously without breaks.
Similarly, the blender needs a break, or it might get overheated and either stop working or display those blinking lights.
So, be sure to let the blender rest before the next use to make those lights disappear.
Check Internal Issues
If you suspect the lights are due to internal issues, refer to the manual to open the base or internal parts of the blender and inspect the problem.
If you believe you can fix any damage, go ahead. Otherwise, it’s advisable to take your blender to a professional. Once it’s fixed, the lights will disappear.
What’s The Best Way To Clean Your BlendJet Blender?
Cleaning the BlendJet blender is incredibly easy and results in a perfectly clean appliance. Just follow these steps:
- First, rinse the blender jar with water to remove any debris or food particles.
- Then, reassemble the blender.
- Add lukewarm water and dish soap.
- Close the lid tightly.
- Blend for 30 seconds to a minute to create a soapy solution.
- Empty the solution.
- Rinse the jar thoroughly, and you’re done.
- For the exterior, you can use a sponge with water or a wet towel.
Remember, with the BlendJet, avoid exposing the bottom part to water to prevent any issues with the electrical components. With the BlendJet 2, there’s no need to worry about exposing it to water, as it’s waterproof.
How Long Does The BlendJet Blender’s Charge Typically Last?
When it comes to BlendJet blenders, I believe this is a crucial question, especially if you’re investing in a battery-powered blender. The battery life is key and contributes significantly to the blender’s worth.
Let me assure you that with BlendJet blenders, you won’t be disappointed. Charging is a breeze—just plug it in for around 1.5 hours, and your blender will be fully charged. After that, it can smoothly handle 15 or more blends.
The duration of the charge depends on how frequently you use the blender. If you use it once a day, it can last approximately 15 days, and so on, depending on your usage.
It’s fantastic how amazing the battery life is here, and you won’t have to worry about charging it frequently.
Given the impressive battery life, you have ample time to charge your BlendJet and then use it effortlessly. Therefore, it’s advisable to avoid using your BlendJet blender while it’s charging, as this could potentially impact your battery life.
Is the BlendJet Blender Worth The Buy?
When it comes to making a purchase, it’s wise to consider all aspects to ensure you’re getting value for your money. Regardless of your budget, nobody wants to buy something that doesn’t live up to expectations, right?
So, it’s essential to assess whether the BlendJet blender is truly worth the investment and, if so, why. I’ve outlined in the table below some reasons why I believe it’s absolutely worth every dollar spent.
It’s not just my opinion—many customers share the sentiment that their purchase was well worthwhile.
|The BlendJet blender is known to be the original portable blender. Its compact design and impressive battery life make it ideal to carry it anywhere.
|Using BlendJet blenders is very simple, and you can experience firsthand how time-saving and efficient this blender is.
|Easy To Clean
|Cleaning is the most crucial part and with BlendJet, all you need to do is fill it with water and dish soap, blend it, rinse the blender, and you’re good to go.
|The BlendJet blender provides excellent convenience not only because it’s easy to use and carry but also because you can directly use the blender’s jar to drink.
|With everyone’s busy schedules, taking care of health can be challenging. However, with BlendJet, you can bring it anywhere and your nutrition will be ready in no time.
Keep in mind that these are general reasons and opinions may differ from person to person.
What’s the Difference Between BlendJet and BlendJet 2?
BlendJet and BlendJet 2 are portable blenders designed for user convenience. Both models share basic functions, are made from high-quality materials, and come in a variety of colors to suit individual preferences.
While BlendJet 2 is an upgraded version, addressing customer feedback and incorporating advanced features for enhanced functionality, the differences are notable, but not overwhelmingly so.
The improvements focus on better performance and reducing the chances of customer concerns. If you’re considering a purchase, a detailed comparison table is provided below for clarity:
|BlendJet is the original model.
|BlendJet 2 is the upgraded version.
|BlendJet comes with a 12 oz jar.
|BlendJet 2 has a 16 oz jar.
|BlendJet offers a solid battery life, allowing for up to 15 blends.
|BlendJet 2 has a slightly longer battery life, lasting up to 20 blends.
|It comes with an adequate motor for the blender to function effectively.
|BlendJet 2 is equipped with a stronger and five times more powerful motor.
|BlendJet provides a single blending mode, mainly designed for smoothies.
|BlendJet 2 offers three modes—Blend Mode, Pulse Mode, and Lock Mode.
|Cleaning BlendJet can be a bit more challenging as it doesn’t have detachable blades.
|BlendJet 2 features detachable blades, making the cleaning process much easier for you.
|BlendJet 1 doesn’t come with markings on the jar.
|BlendJet 2 has convenient markings on the side of the jar, making it simple to measure your ingredients accurately.
- BlendJet is a portable blender for on-the-go nutrition.
- The red and purple blinking lights on BlendJet indicate issues like insufficient charging, battery problems, overheating, misalignment, or damaged electrical components.
- To resolve the red and purple lights issue, ensure proper charging, check and replace the battery if needed, avoid overheating, align the blender correctly, and consider resetting.
- For cleaning, rinse the jar, assemble, add warm water with dish soap, blend briefly, empty the solution, and rinse thoroughly.
- The BlendJet blender typically lasts for approximately 15+ blends on a full charge.
- BlendJet is considered worth buying for its portable convenience, ease of use, and positive customer feedback.
- The main differences between BlendJet and BlendJet 2 include jar capacity, power, multiple modes, detachable blades, and jar markings for measurement.